Zinc ZN25154 User Instructions

Thebe 360 Degree
Surface Mount PIR
With 3 Sensors
ZN25154
User Instructions
Welcome to use ST05B infrared motion sensor!
The product adopts good sensitivity detector and integrated circuit. It gathers automatism,
convenience, safety, saving-energy and practical functions. It utilizes the infrared energy from
human as control-signal source and it can start the load at once when one enters detection field. It
can identify day and night automatically. It is easy to install and used widely.
SPECIFICATION:
Power Source: 220-240V/AC
Power Frequency: 50Hz
Ambient Light: <3-2000LUX (adjustable)
Time Delay: Min.10sec±3sec
Max.15min±2min
3 × DETECTOR
Detection Range: 360°
Detection Distance: 12m max(<24℃)
Working Temperature: -20~+40℃
Working Humidity: <93%RH
Power Consumption: approx 0.5W
Rated Load: Max.1200W
300W
FUNCTION:
 Can identify day and night: The consumer can adjust working state in different ambient light.
It can work in the daytime and at night when it is adjusted on the "sun" position (max). It can
work in the ambient light less than 3LUX when it is adjusted on the "3" position (min). As for
the adjustment pattern, please refer to the testing pattern.
 Time-Delay is added continually: When it receives the second induction signals within the
first induction, it will restart to time from the moment.
Good sensitivity
INSTALLATION ADVICE:
As the detector responds to changes in temperature, avoid the following situations:
 Avoid pointing the detector towards objects with highly reflective surfaces, such as mirrors
etc.
 Avoid mounting the detector near heat sources, such as heating vents, air conditioning units,
light etc.
 Avoid pointing the detector towards objects that may move in the wind, such as curtains, tall
plants etc.
CONNECTION:
Warning. Danger of death through electric shock!
 Must be installed by professional electrician.
 Disconnect power source.
 Cover or shied any adjacent live components.
 Ensure device cannot be switched on.
 Check power supply is disconnected.
Installation Height: 2.2-4m
Detection Moving Speed: 0.6-1.5m/s
Poor sensitivity