Smeg DF13E2WH Manual page 17

User instructions
CHANGING A PROGRAM
To change the running program it is necessary:

to interrupt the running program (see "I

select the new program;

start the program (see "S
ANNULLING A PROGRAM
To annul the program, keep the START/PAUSE button (4) pressed until
the program is interrupted (light on and confirmation beep).
Press button (4) again and keep it pressed until the
program lights 4 and 5 (marked "end") come on.
The water in the tank will be pumped out and the program will end at the
point where it was interrupted.
NTERRUPTION A PROGRAM
TARTING THE PROGRAM
");
").
17