Turning The Projector On; Changing The Language Of The Projector Menus; Changing Screen Type; Switching Between Image Sources - Epson PowerLite EB-L530U Quick Reference

Turning the Projector On

1. Turn on your computer or image
source.
2. Press the power button on the
projector or remote control. After the
status light stays blue, the projector
is ready.
Note: If the Direct Power On function is
enabled, you can turn the projector on
without pressing the
just plug it in or flip the switch controlling
the outlet to which the projector is
connected. To turn on this feature, see
the online User's Guide.
3. If your image does not appear, see

"Switching Between Image Sources"

or "Troubleshooting."
Changing the Language of
the Projector Menus
The default language of the projector's
menu system is English, but you can
change it as necessary.
1. Press the Menu button to access
the projector's menu system.
2. Select Management > Language.
3. Select your language.
4. When you're done, press the Menu
button to exit.
Switching Between Image
Sources
Press the Source Search button or one
of the source buttons on the remote
control.
power button;
Displaying a Test Pattern
Note: See the online User's Guide for
instructions on displaying a test pattern from
the remote control using the Settings menu.
1. Press the down arrow/
the projector.
2. Press the Enter button to change
the test pattern.
3. When you're done, press the Esc
button to clear the test pattern.

Changing Screen Type

Set the Screen Type setting to the
screen's aspect ratio.
1. Press the Menu button.
2. Select Installation > Screen Type.
3. Select the screen's aspect ratio.
Note: The displayed image should match
the screen's size and shape.
4. When you're done, press the Menu
button to exit.
Note: After changing the screen type, you
may need to change the aspect ratio of the
projected image depending on the input
signal. Press the Aspect button on the
remote control to change the aspect ratio,
if necessary.
button on