LG 55LV77A-7B.AUS Owner's Manual page 48

48
CUSTOMIZING SETTINGS
Setting
Set ID You can assign a unique Set ID NO (name assignment) to each product when several products
are connected for display. Specify the number (1 - 255, 1 - 1,000 in certain models) using the
button and exit. Use the assigned Set ID to individually control each product using the Product
Control Program.
Tile Mode Tile Mode
Auto Config.
Position
Size
Natural
Reset
PIP/PBP Displays videos or photos stored in the USB device on a single monitor by dividing it into the main
and sub screens.
Option
Mode
Position
Size
y y
To use this function
- Must be displayed with various other products.
- Select Tile Mode, set rows and columns, and then enter the tile ID to set the
location.
- Tile Mode: row x column (row = 1-15, column = 1-15).
- 15 x 15 available.
Sets to adjust the screen position, clock, and phase automatically.
The displayed image may be unstable for a few seconds while the
configuration is in progress.
Moving the screen position horizontally and vertically.
Adjust the horizontal and
of the bezel.
The image is omitted by the distance between the screens to be naturally
shown.
Function to initialize and release Tile.
All Tile setting are released when selecting Tile recall and the screen returns to
Full screen.
* Natural is not initialized.
Sets the type of secondary screen.
*OFF: Disables the secondary screen.
*PIP (Picture In Picture): Displays the secondary screen in the main screen.
*PBP (Picture By Picture): Displays the secondary screen next to the main
screen.
Adjusts the position of the sub screen (top left, bottom left, top right, bottom
right)
The default value is the bottom right.
Adjusts the size of the sub screen (Size 0 to 10).
The default size of PIP (Size: 0) is 480x270; the maximum size 10 is 960x540.
NOTE
The Position and Size options are enabled only in PIP mode.
Description
vertical size of the screen taking into account the size