Table of Contents
Advertisement
Malfunctions
Fault
The appliance is not work-
ing.
The programme does not
start.
The door cannot be opened. – – – is activated.
The water is not draining.
Cause
The mains plug of the power
cord is not plugged in.
The circuit breaker is faulty.
There has been a power cut.
You have not pressed Start/
Reload.
Door is not closed.
Childproof lock is activated.
Ready In is activated.
Laundry is caught in the
door.
The temperature is too high.
Water level is too high.
Power failure.
Drain pipe or water outlet
hose is blocked.
Troubleshooting en
troubleshooting
Connect the appliance to the power
▶
supply.
Check the circuit breaker in the
▶
fuse box.
Check whether the lighting in your
▶
kitchen or other appliances are
working.
Press Start/Reload.
▶
Close the door.
1.
Press Start/Reload to start the pro-
2.
gramme.
→ "Deactivating the childproof
▶
lock", Page 45
Check whether Ready In is activ-
▶
ated.
→ "Buttons", Page 29
Open the door again.
1.
Remove any trapped laundry.
2.
Close the door.
3.
Press Start/Reload to start the pro-
4.
gramme.
Continue the programme by select-
▶
ing Spin or Drain and pressing
Start/Reload.
→ "Resuming the programme when
the programme status is Rinse
Hold", Page 44
Wait until the temperature has
▶
dropped.
→ "Cancelling the programme",
▶
Page 44
Start the Drain programme.
▶
Open the door using the emergency
▶
release.
→ "Emergency release", Page 61
Clean the drain pipe and the water
▶
outlet hose.
55
Advertisement
Table of Contents
