Belkin F9K1002V5 User Manual page 34

I can't connect to the Internet wirelessly and my network name is not listed in
Available Networks.
1) Verify that your Router is on and the front‐panel light shows
solid blue.
2) If you are far from the Router, you might try moving closer to
see if you might have been out of range.
3) Using a computer attached to the Router via a network cable,
visit http://router/ and ensure that "Broadcast SSID" is ON.
This setting is found on the "Channel and SSID" page.
My wireless network performance is slow, inconsistent, suffers from weak
signal, or I'm having difficulty maintaining a VPN connection.
Wireless technology is radio-based, which means connectivity
and the throughput performance between devices decreases
when the distance between devices increases. Other factors that
will cause signal degradation (metal is generally the worst
culprit) are obstructions such as walls and metal appliances.
Note also that connection speed may decrease as you move
farther away from the Router.
In order to determine if wireless issues are related to range, we
suggest temporarily moving the computer within 10 feet from
the Router if possible.
Changing the wireless channel—
interference, switching the wireless channel of your network can
improve performance and reliability. See the section titled
"Changing the Wireless Channel" for instructions on how to
choose other channels.
Limiting the wireless transmit rate
help improve range and connection stability. Most wireless
cards have the ability to limit the transmission rate. To change
this property in Windows, go to the Windows Control Panel,
open "Network Connections", and double-click on your wireless
card's connection. In the properties dialog, select the
"Configure" button on the "General" tab, then choose the
"Advanced" tab and select the rate property.
Depending on local wireless traffic and
—Limiting the wireless transmit rate can