Belkin F9K1002V5 User Manual page 26

B) Modem (WAN) Connector
Connect your modem to this port using an Ethernet cable.
C) Power Connector
Connect the included power supply to this jack.
D) Reset Button
This button is used to restart your Router in rare cases when it
functions incorrectly. Resetting the Router will preserve your
settings. This button may also be used to restore the factory default
settings. Please see the Troubleshooting section for more
information.
E) Wi‐Fi Protected Setup (WPS) Light
The small light near the WPS button shows what is happening
while you are using WPS to establish a connection.
Off: Idle
Blinking Blue: The Router is listening for a WPS‐enabled computer or
other device.
Solid Blue: The Router has made a secure connection with the computer or
other device.
Amber: A connection was not created.
F) Wi‐Fi Protected Setup (WPS) Button
The WPS button on the front of your Router can be used to help
establish a secure connection between your Router and other WPS‐