Page 1
Axle Bearing Press Tool Parts List Item Description Part No. Standoff Adaptor M12 x 1.25(4 off) GGT-6045 To suit Series 100. Not supplied with GGT-620. Purchased separately. Standoff Adaptors Introduction: Thank you for purchasing a quality tool from G & G Technics, as you will be aware all the tools from G &...
Page 2
3. Attach the GGT-6045 Nuts to the backing plate/ bearing hub, 4. Place the GGT-620 over the axle and attach to the GGT-6045 Standoff Adaptors. No need to remove the shrink ring. 5. Attach the axle and the GGT-620 tool up and under your shop press and slide the press plates as close as possible to the centre of the tool.