G&G Technics GGT-600 Instructions

2
1
Introduction:
Thank you for purchasing a quality tool from G & G Technics, as you will be aware all the
tools from G & G Technics are designed and manufactured in Australia.
General Maintenance:
No maintenance is required other than keeping the equipment clean and avoiding thread
damage on the extension nuts.
Safety:
Please follow the safety procedures associated with using all press tools;
1. Safety Glasses
2. Gloves
3. Press Safety guards
Warranty:
This tool is covered by a 2 year warranty against manufacturing defects.
Warranty does not cover;
• Misuse or excessive loading of the tool if circlips or
locknuts are not removed prior to pressing.
GGT-600
Axle Bearing Press Tool
Item Description
No.
1 Main Body of Press Tool Adapter
2 Extension Nuts; M12 x 1.5P (4 off)
3
3 Extension Nuts; M10 x 1.25P (4 off) GGT-6042
4 Extension Nuts, M12 x 1.25 (4 off)
4
www.ggtechnics.com.au
Parts List
Part No.
GGT-600
GGT-6041
GGT-6043