Table of Contents
Advertisement
2
1
1
4 Remove the shaving heads from the
shaving head holder.Discard the used
shaving heads immediately to avoid mixing
them with the new shaving heads.
5 Place the new shaving heads in the shaving
head holder.
Note: Make sure the notches on both sides
of the shaving heads fit exactly onto the
projections in the shaving head holder.
6 Place the retaining ring on the shaving
head and turn it clockwise to reattach the
retaining ring. Repeat this process for the
other retaining rings.
- Each retaining ring has two recesses
that fit exactly around the projections of
the shaving head holder. Turn the ring
clockwise until you hear a click to indicate
that the ring is fixed.
Note: Hold the shaving head holder in your
hand when you reinsert the shaving heads
and reattach the retaining rings. Do not place
the shaving head holder on a surface, as this
may cause damage to the shaving heads.
25
English
Advertisement
Table of Contents
