Technical Data; Screen Fabric - iGGUAL PSIMS200 User Manual

English
1. Structure
2. Installing
Choose a suitable place for installing, open the tripod feet first, pull out the upper bar to a suitable height and lock it, hang the pulling rod above to the goose neck
and adjust the screen height, then finally fix/lock it at a satisfied position which you want. After using, release the screen and put it back to the housing.
3. Useful instructions
a. The tripod legs should be placed steady.
b. When adjusting the height of screen should be move the upper bar slowly and carefully.
4. Warnings
a. The screen can not be folded. Do not use fingers or hard objects to touch the screen surface. Do not splash the milk, fruit juice or other chemical doses to the
screen surface. Keep the screen far away from the high temperature objects or fire.
b. If the screen is dirty wash the screen gently by a broom or a cotton ball, do not use the organic solvents to clean the screen surface.
c. When pulling the screen down, must be slowly and vertical. Do not pull it roughly. Please stop pulling as soon as the black border is out or the screen is jammed or
injured, then send the screen to the maintenance center.
d. After using, put the screen back to the housing in order to avoid being polluted. lf not using it for a long time, please take the screen from the wall and pack it in a
carton.

TECHNICAL DATA

a. Matte White Screen
Gain: 1.1
Viewing Angle: 160
High color rendering, high resolution.
b. Glass Beaded Screen
Gain: 2.5
Viewing Angle: 60
High color rendering, high resolution.
c. High quality synchronous or tubular motor is equipped in the left
end of the screen housing.
d. Gain Measurement: refer the fig below
Standard: JB T8389
e. Viewing Angle Measurement: refer the fig below
Standard: JB.. T8389

SCREEN FABRIC

®
CONNECT & ENJOY
TRIPOD SCREEN
Projection Screen. User Manual