Table of Contents
Advertisement
D
E
F
G
18
Pull the fi tting (D) outwards from the milk frothing device.
19
Remove the suction tube (E).
20
Pull the fi tting (F) outwards and separate it from the remaining part (G).
21
Clean thoroughly all the parts with lukewarm water.
Note:
You can also clean these parts in the dishwasher.
22
Reassemble the parts following the reverse order.
Note:
As explained at step 13, the dispenser can only be inserted into the lid,
when it is in the reference ( ) position.
ENGLISH
47
47
Advertisement
Table of Contents
