Dynamic Connection - Belkin F9K1112 v1 User Manual

If a password screen appears, press "Submit."
[Image of the login screen showing the submit button – see
"Tested QIG 2011 07 14.pdf" provided for guideline]

Dynamic Connection

Cable and fiber customers generally require a dynamic
connection. Some DSL customers require a PPPoE
connection. Let's try dynamic first. Select "Dynamic" from the
menu that appears and press "Next."
[Image of the connection type screen with dynamic
selected – see "Tested QIG 2011 07 14.pdf" provided for
guideline]
A service name is generally not required. Hit "Apply Changes."
The Router will restart.
[Image of the service name page – see "Tested QIG 2011 07
14.pdf" provided for guideline]
If after a few minutes your Internet Status says "Connected,"
you're done! You can surf the Internet.
– see "Tested QIG 2011 07
[Image of browser showing "connected" homepage
14.pdf" provided for guideline]
If these steps do not work, try restarting your modem and
repeating the process.
If not, we'll try a PPPoE connection next.