D-Link P.DG A4001N A-000-1A1-AE User Manual page 12

Section 2 – Installation
Information you will need about your LAN or computer
:
Ethernet NIC
If your computer has an Ethernet NIC, you can connect the 4port 2x2 Wireless ADSL Router to this Ethernet port using an Ethernet cable. You can
also use the Ethernet ports on the 4port 2x2 Wireless ADSL Router to connect to other computer or Ethernet devices.
DHCP Client status
Your 4port 2x2 Wireless ADSL Router is configured, by default, to be a DHCP server. This means that it can assign an IP address, subnet mask,
and a default gateway address to computers on your LAN. The default range of IP addresses the 4port 2x2 Wireless ADSL Router will assign are
from 192.168.1.2 to 192.168.1.254. Your computer (or computers) needs to be configured to obtain an IP address automatically (that is, they need
to be configured as DHCP clients.)
It is recommended that your collect and record this information here, or in some other secure place, in case you have to re-configure your ADSL
connection in the future.
Once you have the above information, you are ready to setup and configure your 4port 2x2 Wireless ADSL Router ADSL Router.
4Port 2x2 wireless ADSL modem User Manual 12