Table of Contents
Advertisement
30
CUSTOMIZING SETTINGS
PBP settings
1
To view the Menu OSD, press the Menu (
2
Press < or > to go to PBP.
3
Press OK/PBP to select PBP.
4
Use the < or > buttons to set the options.
5
Select
to exit the OSD menu.
To return to the upper menu or set other menu items, use the Menu (
Sub Menu
Audio-In
Off
PBP
Audio
Swap
Each option is described below.
Menu > PBP
PBP
Displays the screens of two input modes on one monitor.
(DVI+DP, HDMI1+DP, HDMI2+DP, DP+DVI, DP+HDMI1, DP+HDMI2)
Audio
Changes the audio output in PBP mode.
Swap
Toggles between the main screen and sub screen in PIP mode.
Sub Full
Converts the sub screen of PBP mode to the wide screen.
Ratio
Adjusts the aspect ratio of the main screen or sub screen.
Main
Sub
Back
Moves to the previous OSD screen.
Exit
Exits the OSD menu.
NOTE
When the PBP mode is Off, Audio, Swap, Sub Full, and Ratio menus become deactivated. The
y
Main/Sub options for Ratio become deactivated if there is no signal.
) button at the bottom of the monitor.
Sub Full
Ratio
Wide
Displays the video to fit the PBP screen, regardless of the video signal
input.
Original
Displays the video in the input video signal aspect ratio on the PBP
screen.
Wide
Displays the video to fit the PBP screen, regardless of the video signal
input.
Original
Displays the video in the input video signal aspect ratio on the PBP
screen.
) button.
Back
Exit
Description
PBP
Advertisement
Table of Contents
