Initial Setup; Password Change; Using The Tv Controller - Samsung UA40J5500 Manual

Initial Setup

When you turn on your TV for the first time, it immediately starts the Initial Setup. During Initial Setup, connects to your
Smart Hub
network, implements
set-top box.
To learn more about operating your TV, launch the TV's built in
e-Manual
Information about the

Password Change

System Change PIN
>
Changing the TV's password.
1. Run Change PIN
and then enter the current password in the password field. The default password is "0-0-0-0".
2. Enter a new password and then enter it again to confirm it. The password change is complete.
PIN
- If you forgot your code, press the buttons in the following sequence to reset the
MUTE
In Standby mode:

Using the TV Controller

You can use the TV Controller on the back of the TV instead of the remote control to control most of the functions of your TV.
agreements, links to the source of your live TV signal, and sets up control of your cable or
e-Manual
, see "The " on page 8.
→ → → →
POWER
8 2 4 (On)
The
on the lower left corner of
English - 4
e-Manual
after you have completed the Initial Setup. For
: Opens
Control Menu
: Opens the menu
: Selects a source.
: Turns off the TV.
Control Stick
Control Stick
is located
the back of the TV.
Remote control sensor
PIN
to "0-0-0-0":
Smart Hub
.