Table of Contents
Advertisement
PRECISION MACHINE TOOLS
2-1 Cautions for High Speed Processing
During high-speed processing (S = 8000 rpm or above; F = 300 mm/min or above), the shank and
the style of the cutter has a critical impact on spindle lifespan and processing precision.
Matters that need more attention are:
1). Grasp the cutter before running the spindle to avoid damaging the spindle.
2). During high-speeding chipping (8000rpm or above), use only G2.5 level cutters and shanks that
have been calibrated for dynamic balance. The reason is that vibration generated from centrifugal
force may damage the spindle bearing and rapidly wear out the cutter.
3). Balance tolerance for the shank and the cutter combination is affected by the following three
factors：rotation speed of the cutter, balance tolerance of the spindle, and weight of the shank.
Therefore, using a shorter cutter with a smaller diameter for high-speed chipping is advantageous
in terms of spindle vibration, temperature increase, thermal deformation, and processing
precision.
4). The geometric shape of the cutter blade has an effect on cutter abrasion. Increase the angular
backlash of the blade can reduce abrasion due to scratches. Suitable cutter materials can also
minimize abrasion during high-speed processing; for example, cermets, tin or tic coated carbide
cutters have longer lifespan than conventional cutters. Ceramic (Si
cermets cutters.
5). Perform another dynamic balance calibration after combining the cutter and the shank together
The dynamic balance standard should be G2.5 or above.
Balance level
Spindle Rotation Speed (rpm)
6000 – 8000
8000 – 10000
10000 – 12000
12000 – 15000
15000 – 18000
50 – 6000 rpm
6000 – 18000 rpm
Cutter Diameter (mm)
125
100
80
65
50
Level G6.3
Level G2.5
Cutter Length (mm)
250
250
250
200
200
16
Ver 1 Maintenance Manual
N
) cutters are better than
3
4
Advertisement
Table of Contents
