Sharp SV2414 Maintenance Manual page 14

PRECISION MACHINE TOOLS
Cautions
Guide way check
Correctly locking the work pieces
Correctly locking the doors
Prevention
Constantly check the guide ways of the three
axes (X, Y & Z). Check whether there are iron
filings or other types of grains attached to the
guide ways. To extend the lifespan, remove the
dust or they may scratch the slide.
When placing work pieces onto the workbench,
make sure that they are well locked or they may
spin out and cause personnel injury.
Make sure the operation door and the two side
doors are well locked to prevent the cutter from
bursting apart or iron filings from flying out,
which is dangerous.
14
Ver 1 Maintenance Manual