Download  Print this page

Installation - Acer P201W Quick Start Manual

Acer p201w: user guide.
Hide thumbs

Advertisement

Table of Contents

INSTALLATION

To install the monitor to your host system, please follow the steps as given
below:
Steps
1. 1-1
Connect Video Cable
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the VGA video cable to the computer.
1-2
Digital Cable (Only Dual-Input Model)
a. Make sure both the monitor and computer are powered-OFF.
b. Connect one end of the 24-pin DVI cable to the back of the
monitor and connect the other end to the computer's port.
2. Connect power cord
Connect the power cord to the monitor, then to a properly grounded AC
outlet.
3. Power-ON Monitor and Computer
Power-ON the monitor first, then power-ON the computer.
This sequence is very important.
4. If the monitor still does not function properly, please refer to the
troubleshooting section to diagnose the problem.
EN-12
P201W

Advertisement

Table of Contents

This manual is also suitable for:

P193wP201P193P191wdEt.cx3wp.c01Lcd monitor

Comments to this Manuals

Symbols: 0
Latest comments: