Pbp - LG 29UC97 Owner's Manual

PbP

1
To view the osD menu, press the joystick button at the
bottom of the monitor and then enter the Menu.
2
Go to PbP by moving the joystick.
3 Configure the options following the instructions that appear
in the bottom right corner.
4
To return to the upper menu or set other menu items, move
the joystick to ◄ or pressing (
5
If you want to exit the OSD menu, move the joystick to ◄
until you exit.
Each option is described below.
Menu > PbP
sub Displays the screens of two input modes on one monitor.
screen
sound out Changes the audio output in PBP mode.
swap Toggles between the main screen and sub screen in PBP mode.
sub full Converts the sub screen in PBP mode to wide screen.
Ratio Adjusts the aspect ratio of the main screen or sub screen.
Main
sub
noTe
When the Sub mode is Off, Sound Out, Swap, Sub Full, and Ratio menus become disabled.
y
The Main/Sub options for Ratio become disabled if there is no signal.
/ OK) it.
PbP Connection
HDMI 1
Main
HDMI 2
DisplayPort
(left)
Thunderbolt ( )
Wide
original
Wide
original
Quick settings
PbP
Picture
sound
General
Reset
Description
sub screen (Right)
HDMI 1 HDMI 2
- O
O -
O O
O O
Displays the video to fit the PBP screen, regardless of the
video signal input.
Displays the video in the aspect ratio of the video signal input
on the PBP screen.
Displays the video to fit the PBP screen, regardless of the
video signal input.
Displays the video in the aspect ratio of the video signal input
on the PBP screen.
UseR seTTInGs
PbP
sub
sound out HDMI1
swap
sub full
Ratio
PBP Preview
HDMI1
▲/▼ : Move ◄: Back
/ ►: OK
DisplayPort Thunderbolt
O O
O O
- X
X -
21
>
off
>
>
( )