10
asseMblInG anD PRePaRInG
Cautions When Connecting Power Cord
100-240 V ~
Be sure to use the power cord that is provided
y
in the product package and connect it to a
grounded power outlet.
If you need another power cord, please con-
y
tact your local dealer or the nearest retail
store.
Tidying up Cables
Arrange the cables using the cable tie as shown in
the illustration.
adjusting the angle
1
Place the monitor mounted on the stand base
in an upright position.
2
Adjust the angle of the screen. The angle of
the screen can be adjusted forward or back-
ward from -5° to 15° for a comfortable
viewing experience.
Rear
WaRnInG
To avoid injury to the fingers when adjusting
y
the screen, do not hold the lower part of the
monitor's frame as illustrated below.
Be careful not to touch or press the screen
y
area when adjusting the angle of the monitor.
15
-5
front
15
-5
15
-5