Magic Remote Functions - LG 79UG880T Owner's Manual

Hide thumbs Also See for 79UG880T:
Table of Contents

Advertisement

Available languages

Available languages

40

MAGIC REMOTE FUNCTIONS

MAGIC REMOTE FUNCTIONS
When the message
is displayed, replace the battery. To install batteries, open the battery cover,
replace batteries (1.5 V AA) matching
the compartment, and close the battery cover. Failure to match the correct
polarities of the battery may cause the battery to burst or leak, resulting in
fire, personal injury, or ambient pollution. Be sure to point the remote control at the remote control
sensor on the TV. To remove the batteries, perform the installation actions in reverse.
CAUTION
Do not mix old and new batteries, as this may damage the remote control.
y
y
This remote uses infrared light. When in use, it should be pointed in the direction of the TV's remote
sensor.
Turns the TV on or off.
Returns to the previous screen.
Press the center of the wheel
button to select a menu.
You can change channels by using
the wheel button.
Switches among broadcast
(antenna) and various inputs.
These access special functions in
(
: Red,
: Yellow,
Adjusts the volume level.
Displays the Screen Remote.
Accesses the Universal Control
Menu in some regions.
Pressing and holding the
will display a menu to select an exter-
nal device that is connected to the TV.
Used for viewing 3D video.
Pressing and holding the
will display a menu to resize
an image. (For 105UC9T)
Mutes all sounds.
Scrolls through the saved channels.
Magic remote control battery is low. Change the battery
and
(POWER)
(BACK)
Wheel (OK)
(EXIT to LIVE)
Color buttons
some menus.
: Green,
: Blue)
VOL
button
button
(MUTE)
CH
ends to the label inside
Accesses the Home menu.
Press the up, down, left, or
right button to scroll the menu.
If you press
while the pointer is in use, the
pointer will disappear from the
screen and the Magic Remote
will operate like a general
remote control.
To display the pointer on the
screen again, shake Magic
Remote to the left and right.
(Voice recognition)
Network connection is required
to use the voice recognition
function.
1. Press the voice recognition
button.
2. Speak when the voice dis-
play window appears on the
left of the TV screen.
Use the Magic Remote no
further than 10 cm from your
face.
The voice recognition may
fail when you speak too fast
or too slowly.
The recognition rate may
vary depending upon the
user's characteristics (voice,
pronunciation, intonation, and
speed) and the environment
(noise and TV volume).
.
(Home)
(up/down/left/right)
buttons

Advertisement

Chapters

Table of Contents
loading

Table of Contents