Table of Contents
Advertisement
If the following symptoms occur, please carry out the checks and adjustments
described below. There may be no malfunction.
SMART
➾
Shows the MUX and Service information etc. If you select Antenna & Satellite or
Cable & Satellite, a signal test only for Antenna or Cable is displayed.
General
❐
Problem
Cannot view certain
channels.
After turning on the TV,
there is a delay before
full images appear.
Settings
➙
SUPPORT
• Adjust the location or orientation of the antenna.
• Save the desired channels on
• It is not a problem because this process was intended to
clean up the image noises that may occur when turning on
the TV.
➙
Signal Test
Solution
Auto Tuning
or
Channel Edit.
Advertisement
Table of Contents
