LG 42LA6200 Owner's Manual

LG 42LA6200 Owner's Manual

Hide thumbs Also See for 42LA6200:

Advertisement

Life's Good
! ¸
K
ill
i
x
t
LED TV
LG LED TV applies
LCD screen wiih LED backlights.
Please
read
this
manual
carefully
before
operating
>,our set and
retain
it for future
reference.
42LA6200
47LA6200
50LA6200
55LA6200
60LA6200
42LA6205
47LA6205
50LA6205
55LA6205
60LA6205
P/NO
: MFL67711002
(1302-REV01)
www.lg.com

Advertisement

Table of Contents
loading

Summary of Contents for LG 42LA6200

  • Page 1 ! ¸ Life's Good LED TV LG LED TV applies LCD screen wiih LED backlights. Please read this manual carefully before operating >,our set and retain it for future reference. 42LA6200 42LA6205 47LA6200 47LA6205 50LA6200 50LA6205 55LA6200 55LA6205 60LA6200 60LA6205 www.lg.com...
  • Page 2: Important Safety

    IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product. Read these instructions. Keep these instructions. WARNING/CAUTION Heed all warnings. Follow all instructions. Do not use this apparatus near water.
  • Page 3 IMPORTANT SAFETY INSTRUCTIONS Protect the power cord from being walked on CAUTION concerning the Power Cord or pinched particularly at plugs, convenience (Can differ by country): receptacles, and the point where they exit from the It is recommended that appliances be placed upon a dedicated circuit;...
  • Page 4 If you smell smoke or other odors coming from Do not attempt to modify this product in any way the TV, unplug the power cord and contact an without written authorization from LG Electronics. authorized service center. Unauthorized modification could void the user's Keep the product away from direct sunlight.
  • Page 5 IMPORTANT SAFETY INSTRUCTIONS Dot Defect For USA and Canada The Plasma or LCD panet is a high technology product with resolution of two million to six million pixels. In a very few cases, you could see fine dots on the screen while you're viewing the TV. Those dots are deactivated pixels and do not affect the This equipment has been tested and found to...
  • Page 6: Viewing 3D Imaging (For 3D Models)

    3D Content. Make sure to use LG 3D glasses. Otherwise, may not be able to view 3D videos properly. Do not use 3D glasses instead of your normal Do not watch 3D Content when you feet fatigue glasses, sunglasses or protective goggles.
  • Page 7: Licenses

    In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon emait request to 'opensource@lge.com'.
  • Page 8: Table Of Contents

    TABLE OF CONTENTS TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS REMOTE CONTROL Viewing 3D Imaging (For 3D models) MAGIC REMOTE CONTROL LICENSES FUNCTIONS Registering Magic Remote Control OPEN SOURCE SOFTWARE NOTICE How to use Magic Remote Control Precautions to Take when Using the Magic Remote Control TABLE...
  • Page 9: Installation Procedure

    INSTALLATION PROCEDURE ASSEMBLING PREPARING INSTALLATION PROCEDURE Open the package and make sure all the accessories are included. Attach the stand to the TV set. Connect an external device to the TV set. Make sure the network connection is available. You can use the TV network functions only when the network connection is made.
  • Page 10: Assembling And Preparing

    Power Cord Stand Screws Stand Body, Stand Base 8 EA, M4 x 14 (See p. 14) (See p. 14) (For 42/47/50LA6200, 42/47/50LA6205) (For 42LA6200, 42LA6205) (For 47/50LA6200, 47/50LA6205) Desk-mount Cable Bracket Screw Bracket Screw 2 EA 2 EA, M4x8 2 EA, P4x8 (See p.
  • Page 11: Optional Extras

    Converts supported by the 3D TVs in this most 2 player split-screen manual. games to full screen. Sound © o ¢ i ::=,= ..AN-VC4** LG Audio Device Tag On Video Call Camera Near Field Communication (NFC) tag.
  • Page 12: Parts And Buttons

    ASSEMBLING PREPARING Parts Buttons Buttons Speakers Power Indical'or Remote confrol Sensor Infelligenf Sensor Button Description (A /V) Scrolls through the saved channels. (+ /_) Adjusts the volume level. (OK ®) Selects the highlighted menu option or confirms an input. (SETTINGS) Accesses the main menus, or saves your input and exits the menus.
  • Page 13: Lifting And Moving The Tv

    ASSEMBLING PREPARING Lifting and moving the TV When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. CAUTION Avoid touching the screen at atl times, as this may result in damage to the screen.
  • Page 14: Setting Up Thetv

    ASSEMBLING PREPARING Setting up theTV The TV can be mounted to a wall or the stand can be attached if the TV will be positioned on an entertainment center stand. Affaching sfand If you are not mounting the TV to a wall, use the following instructions to attach...
  • Page 15: Mounting On A Table

    ASSEMBLING AND PREPARING Mounting on a table ,.--- @ NOTE * When adjusting the angle of the TV, watch out for Lift and tilt the TV into its upright position on a table. your fingers. _> Personal injury may occur if hands or fingers are - Leave a 10 cm (4 inch) (minimum) space from the pinched.
  • Page 16 ASSEMBLING PREPARING (Depending on model) (Depending on model) The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer ¢o to the manual provided with the Kensington security system or visit http://www.kensington.com. ©°...
  • Page 17: Mounting On A Wall

    __i_ CAUTION Disconnectthe power first, and then move or An optional wall mount can be used with your LG install the TV. Otherwise electric s hock may occur. Television. Consult with your local dealer for a wall...
  • Page 18: Making Connections

    MAKING CONNECTIONS MAKING CONNECTIONS You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. For more information on external device's connection, refer to the manual provided with each device.
  • Page 19: Hdmi Connection

    MAKING CONNECTIONS Connecting to a HD receiver, Player, or VCR Connect a HD receiver, DVD Player, or VCR to the TV and select an appropriate input mode. HDMI Connection HDMI is the best way to connect a device. Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown in the following illustration.
  • Page 20: Dvi To Hdmi Connection

    MAKING CONNECTIONS DVI to HDMI Connection Transmits the digital video signal from an external device to the TV. Connect external device and the TV with DVI-HDMt cable as shown in the following illustration. To transmit an audio signal, connect an audio cable.
  • Page 21 MAKING CONNECTIONS Connecting to a mobile phone Mobile High-definition Link (MHL) is an interface for transmitting digital audiovisual signals from mobile phones to television sets. _--------- NOTE * Connect the mobile phone to the HDMi IN 3 (MHL) port to view the phone screen on the TV. * This only works for the MHL-enabled phone.
  • Page 22: Component Connection

    MAKING CONNECTIONS Component Connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with a component cable as shown in the following illustration..@.O_E • If cables are installed incorrectly, it could cause the image to display in black and white or with distorted color. •...
  • Page 23: Composite Connection

    MAKING CONNECTIONS Composite Connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown in the following illustration. NOTE • If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the TV. Check to ensure the cables are matched with the corresponding color connection.
  • Page 24 MAKING CONNECTIONS Connecting to a NOTE * it is recommended to use an HDMi connection for the best image quality. * Depending on the graphics card, DOS mode video may not work if a HDMI to DVI Cable is in use. * in PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness, if noise...
  • Page 25 MAKING CONNECTIONS Choose HDMI input port connect. It does matter which port use. (*Not Provided) DVt OUT (*Not Provided)
  • Page 26: Digital Optical Audio Connection

    MAKING CONNECTIONS Audio Connecting to an System You may use an optional external audio system instead of the built-in speaker. Digital Optical Audio Connection Transmits a digital audio signal from the TV to an external device. Connect the external device and the TV with the optical audio cable as shown in the following illustration.
  • Page 27: Connecting Headphones

    MAKING CONNECTIONS 2"7 Connecting Headphones You listen to the sound using headphones. "-@ NOTE • AUDIO menu options are disabled when headphones are connected. • When changing AV MODE with headphones connected, the change is applied to video but not to audio. Optical Digital Audio Out is not available when headphones are connected.
  • Page 28 REMOTE CONTROL REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To install batteries, open the battery cover, replace batteries (I .5 V AAA) matching the {+} and {_, ends to the label inside the compartment, and close the battery cover.
  • Page 29 REMOTE CONTROL INFO0 Shows information on the current program. SMART '_ Accesses the Smart Home menu. MY APPS Shows the list of Apps. Q.MENU Accesses the quick menu. Navigation buttons (up/down/left/right) Scrolls through menus or options. OK ® LIST Selects menus or options and confirms...
  • Page 30 30 MAGIC REMOTE CONTROL FUNCTIONS When t he message "Magic remote control battery islow. C hange the battery." isdisplayed, f"_ replace the battery. To install batteries, open the battery cover, replace batteries (1.5 V AA) matching _4-_, and t_ ends to the label inside the compartment, and close the battery...
  • Page 31 MAGIC REMOTE CONTROL FUNCTIONS Registering Magic Remote Control The Magic Remote Controt operates by pairing with your To register automatica!!y, turn the TV on and Press the @ Wheel(OK}. When registration is completed, the completion message appears on the screen. If registrati0n fails, turn the _ off and back...
  • Page 32 WATCHING WATCHING Turning the TV on for first time "-@ NOTE Select Home when prompted. Store mode puts the TV in demo mode. When you turn the TV on for the first time, the Initial If you select Store, the any customized setting screen appears.
  • Page 33 USINGTHE USER GUIDE USING USER GUIDE User Guide allows you to easily access detailed TV information. Press SMARTd_ button to access the Smart Home menu, Select User Guide and press the OK button.
  • Page 34 SPECIFICATIONS SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions. POWer requirement Ac 100- 240 v - 50 / 60 Hz Television System ..NTSC-M, ATSC, 64 & 256 QAM VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69,...
  • Page 35 SPECIFICATIONS Resolution Horizontal Frequency vertical HorizOntal Vertical Frequency (kHz) Frequency (Hz) Resolution FreqUency (kHz) 31.469 59.94 640x480 31.469 59.94 720x480 31.50 60.00 800x600 37.879 60.31 44.96 59.94 280x720 1024x768 48.363 60.00 45.00 60.00 1152x864 54.348 60.053 33.72 59.94 33.75 60.00 1360x768 47.712 60.015...
  • Page 36 SPECIFICATIONS Video, which is input as below media contents is switched into the 3D screen automatically. 3D Supp0rted mode automatically Horizontal vertica! FrequenCY Signal I Frequency (kHZ) (Hz) 54.00 67 6o 1080p 27.00 F/P, L/A 33.75 67.60 HDMi 67.60 F/P, F/A 1080i 33.75 S/S, T&B, S/S Full...
  • Page 37 320 x 240 (Under) 1024 x 768p _i i 1280 x 720p 2D to 3D, S/S, T&B Miracast /WiDi 1920 x 108Op Others 2D to 3D EXTERNAL CONTROL DEVICE SETUP To obtain the external control device setup information, please visit 'www.lg.com'.
  • Page 38 MAINTENANCE/TROUBLESHOOTING MAINTENANCE Cleaning Your Clean your TV regularly to keep it at peak performance and to extend the product lifespan. Make sure to turn the power off and disconnect the power cord and all other cables first. When the TV is left unattended or unused for a long time, disconnect the power cord from the wail outlet to prevent possible damage from lightning or power surges.
  • Page 39 Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind: THE ISSUE * The home theater entertainment experience is a growing trend and larger flat panel displays are popular purchases. However, flat panel displays are not always supported on the proper stands or installed according...
  • Page 40 1-800-243-0000 USA ¢onsu_÷r Us÷_ 1-888-865-3026 USA Co_÷_ci_l U_÷_ 1-888-542-2623 CANADA www.lg.com The model and seral r umber of the TY s located on t e back, and one sde of the T",£ Tlisproductq_aiife;fo ENERGY STARi'_the "factory...
  • Page 41 Life's Good i_,il _%_ _ _C¸_'+_¸ R _ • " EXTERNAL CONT DEVICE S£ Please read this manual carefully before operating the set and retain it for future reference, www.lg.corn...
  • Page 42 KEY CODES KEY CODES This feature is not available for all models. Code Function NOte Code Function Note (Hexa) (He×a) Q.Menu R!C Button CH +, PR + R!C Button CH -, PR - R/C Button List, - (ATSC Only) R/C Button Volume + R!C Button List...
  • Page 43 (TV) (PC) LGTV supports PL2303 chip-based (Vendor ID " 0x0557, Product ID " 0x2008) USB to serial converter which is not made nor provided by LG. It can be purchased from computer stores that carry accessories for IT support professionals.
  • Page 44 EXTERNAL CONTROL DEVICE SETUP RS-232C with RS-232C Cable (Legacy) Phone jack Type , You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and the TV, which is specified in the manual. * For other models, connect to the USB port. (TV) (PC) This connection can only be used for the following models: 55/47/39LN5450-UA,...
  • Page 45 EXTERNALCONTROLDEVICESETUP Communication Parameters Baud rate : 9600 bps (UART) Stop bit : 1 bit Communication code : ASCII code Data length : 8 bits Parity : None , Use a crossed (reverse) cable. Command reference list DATA , ;OMMAND1 OMMAND2 ( exaa cm "H -'ei...
  • Page 46 EXTERNAL CONTROL DEVICE S ETUP Transmission / Receiving Protocol [Commandl][Command2][ ][Set ID][ ][Data][Cr] [Command 1] First command to control the TV. (j, k, m or x) Second command to control the TV. [Command 2] [Set ID] You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99.
  • Page 47 EXTERNALCONTROLDEVICESETUP * Commands may work differently depending on model and signal. 01. Power (Command: k a) * In case of video mute on only, TV will display On Screen Display(OSD). But, in case of Screen mute _- To control Power Off of the set. on, TV will not display OSD.
  • Page 48 EXTERNAL CONTROL DEVICE SETUP 09. Tint (Command: k j) 14. Color(Colour) Temperature (Command: x u) _- To adjust the screen tint. _- To adjust colour temperature. You can also adjust You can also adjust tint in the PICTURE menu. Color(Colour) Temperature in the PICTURE menu.
  • Page 49 EXTERNALCONTROLDEVICESETUP * Digital Terrestrial/Cable/Satellite Data 05: Input Source (Analogue) - 00 : Terrestrial TV (ATV) [Data 00][Data 01]: Channel Data - 01 : Cable TV (CATV) Data 00 : High Channel data * Digital Terrestrial/Cable Data 01 : Low Channel data - 00 00 ~ 27 OF (Decimal: 0 ~ 9999)
  • Page 50 EXTERNAL CONTROL DEVICE SETUP 20. Control Back Light (Command: m g) [Data Ol][Data 02]: Major Channel Number Data 01: High byte Channel Data For LCD TV / LED TV Data 02: Low byte Channel Data _- To control the back light. - 00 01 ~ 27 OF (Decimal: 1 ~ 9999) [Data 03][Data...
  • Page 51 EXTERNAL CONTROL DEVICE SETUP 22.3D(Command: x t) (only 3D models) 23. Extended 3D(Command: x v) (only 3D models) (Depending on model) (Depending on model) _- To change 3D option for TV. _- To change 3D mode for TV. [Data 00] 3D option Data Structure 00 : 3D Picture Correction [Data00]...
  • Page 52 Life's Good...

Table of Contents