London Electronics Limited
Panel mounting Ampere hour/minute / controller
Connection details, scaling and general information
Caution: There is a risk of electrical
shock if this instrument is not properly installed
Caution: Risk of danger: Read the whole
!
manual before you install this meter
The New version of the INTUITIVE Family, with these extra benefits...
* 20 bit A/D convertor, higher precision, improved stability.
* 16 bit D/A convertor, greater resolution.
* Direct and theoretical linearisation features
* More comms options, for faster, more flexible data access.
* Extra 'Factor and Offset' feature, allows you to correct for Gravity, Container Tare etc.
* Timers on alarm relays.
* More alarm setting modes, including in-band and out of band alarms, pump control.
* Summary Screen, lets you know which options are fitted, whenever you want to know.
* Wider operating temperature range
* Variable brightness feature, plus Daylight viewing option for use in direct sunlight
* Adjustable menu timeout delay, to suit new and experienced users.
* Choice of Basic or Advanced menu in standard model
* Outputs selectable from nett or gross.
* Real -Time clock option
* DIN Rail mounting option
INT2
= Intuitive Mark 2 family
AH
= Ampere Hour model
Analogue output:
Alarm outputs:
Serial data:
Display colour:
Power:
Mounting:
Thorncote Road, Near Sandy, Bedfordshire SG19 1PU
Tel +44(0)1767 626444
www.london-electronics.com help@london-electronics.com
Ordering code:
0=none, ANB=-10to+10V, ANI=4-20mA, ANV=0-10V
0=none,
AL2= 2 relays,
0= none,
232=RS232,
R=Red,
G=Green
AC=100-240V AC,
DC=11-30V DC
0
= Standard panel
DIN
Document Ref:pm65\manuals\INT2_AH
INT2-AH-X-X-X-X-X-X
AL4=4 relays
485=RS485
= DIN rail mounting
Revision:18 Dated: 3 March 2011
Fax +44(0)1767 626446
INT2-AH
Software version F00.21
1