Table of Contents
Advertisement
Touch to take another photo
immediately. Your current photo
will be saved.
Touch to view a gallery of
your saved photos.
Using the flash
The default flash setting is auto,
but there are other options.
1
Select
the viewfinder to enter the
flash submenu.
2
There are three flash options:
Auto – Your camera will assess
the available light and use the
flash, as necessary, to take the
best picture.
On – The camera will always
flash.
Off – The camera will never
flash. This is useful if you want
to save battery power.
3
After touching the option
you want, the flash menu
will automatically close,
allowing you to take a picture
immediately.
on the left side of
4
The flash status icon in the
viewfinder will change, based
on the new flash mode.
Adjusting the exposure
The exposure defines the
difference between light and dark
areas in an image. A low contrast
image will appear foggy, whereas
a high contrast image will appear
much sharper.
1
Touch
2
Slide the contrast indicator
along the bar towards
a lower exposure and hazier
image or towards
higher exposure and sharper
image.
Adjusting the zoom
You can also zoom in or out.
Touch
to adjust the zoom.
.
for a
for
55
Advertisement
Table of Contents
