Air Filter - Echo HCA-2620 Operator's Manual

HCA-2620
2
Inspect blade, and clean and sharpen as needed. Lubricate blades
periodically during use.
3
Low evaporative fuel tanks DO NOT require regular maintenance to
maintain emission integrity.
*Replacement is recommended based on the finding of damage or wear
during inspection.

Air Filter

Level 1
Parts Required:
1. Close choke (COLD START [
entering the carburetor throat when the air filter is removed. Brush
accumulated dirt from air cleaner area.
2. Remove air filter cover. Brush dirt from inside cover.
Assure throttle wire retaining clip
(A) remains in place as shown
when removing or installing air
filter cover.
3. Remove foam pre-filter (B) and
air filter and clean as indicated
below:
4. Foam Pre-filter
• Clean foam filter in water/
detergent solution and rinse
with clean water.
• Wrap the filter in a clean, dry
cloth and squeeze (do not
wring) dry. Allow to dry completely before reuse. Do not oil.
Air Filter
X7502342200
© 5/2017 ECHO Inc.
Tune Up Kit.
] position). This prevents dirt from
MAINTENANCE
B
A
27