Testing Inbound Mail Delivery - 3Com 3CR3MFA-92 Installation Manual

Testing Inbound Mail
Delivery
When you have successfully tested an outbound mail message, you must
send an inbound message to ensure that your router or firewall is
properly configured to forward SMTP port 25 connections to the 3Com
Email Firewall.
1 Modify your Firewall or Router configuration to ensure that incoming
SMTP port 25 connections are forwarded to the hostname or IP address
of the 3Com Email Firewall.
2 From an external mail address, send an email to an internal mail client.
Activity
3 Check the page of the 3Com Email Firewall to ensure the mail
message shows up in the
Refresh button to provide an updated view.
In this scenario, the mail message should use the following route:
External mail client to your Firewall/Router
■
Firewall/Router to the 3Com Email Firewall
■
3Com Email Firewall to the internal mail server
■
Internal mail server to the internal mail client
■
If your message was not delivered, start with your external mail client and
work your way along the route until the point at where the mail was not
delivered to the next point.
When you have isolated the problem, modify your configuration and
retry the test.

Testing Inbound Mail Delivery

Mail Received Recently
29
section. Click the
EN