Q Acoustics Q B12 Owner's Manual page 5

Preparation
Lift the speaker from the carton by holding the cabinet. Do not touch
the driver unit or use the protective bag to lift it. The Q B12 is very heavy
- get assistance to lift it if necessary.
Thread the locking nut onto the spike and screw all four spikes into the threaded inserts on the
subwoofer. If you have a wood or stone floor push a spike protector over each spike before turning
the speaker upright. When the speaker is the right way up adjust all the spikes until the loudspeaker
is level and stable.
Spikes are sharp. Exercise care!
Never place a spiked loudspeaker where it can cause damage!
Always move your loudspeakers by lifting them - never drag them!
5