Connection To Use "Pcoip; Lan Connection; Connecting Usb Devices - Samsung NC221-TS User Manual

2
Using "PCoIP"
2.2

Connection to Use "PCoIP"

Do not connect the power cable before connecting all other cables.

Ensure you connect a source device first before connecting the power cable.

2.2.1 LAN Connection

1
Connect the LAN cable to [LAN] on the back of the product.



2.2.2 Connecting USB Devices

The [ ] port supports up to USB 2.0.

VMware View 4.6 or later is required. Data transfer rate may decrease depending on the network

conditions.
1
Connect a USB device, such as a keyboard or mouse, to [ ] at the back of the product.
LAN
It is not supported when the network speed is below or equal to 10Mbps.
Use Cat7(*STP Type) cable for the connection.
*STP: Shielded Twist Pair
28
2 Using "PCoIP"