Labeling Channels - Toshiba 55HT1U Owner's Manual

To add a channel to the channel memory:
Highlight the checked box next to the channel number
you want to add, and then press
To manually add digital subchannels on a
physical channel:
Use the Channel Numbers and the Dash (
the remote control to enter the channel number (for
example, 56–1).
If the channel is found, the number will be added to
the list and the box will be unchecked.
If the channel is not found, a message will appear.
Note: Skipped channels cannot be selected with
; however, they can still be accessed
or
using the number keys on the remote control.

Labeling channels

A list of common channel labels (logos) for various
channels (ABC, CBS, etc.) will be programmed into
the TV. You will be able to view and assign these
logos from the Channel Labeling window. If the
desired channel label is not provided in the list, you
will be able to manually enter/edit labels using the
software keyboard.
To assign channel labels:
1無
Press and open the Preferences menu.
2無
Highlight Channel Labeling and press
The Channel Labeling window opens.
3無
Press or to select the channel you want to
label.
4無
Press pqtu to highlight the desired channel
label and press .
5無
Repeat steps 3 and 4 for other channels.
6無
To save your settings, highlight Done and press
The maximum number of labels that can be stored
is 128.
26
Chapter 5: Setting up your TV
to remove the tick.
) on
.
.
To remove channel labels:
1無
Open the Channel Labeling window.
2無
Press or to select the channel for which
you want to remove the label.
3無
Press pqtu to highlight No Label and press
4無
Repeat steps 2 and 3 for other channels.
5無
To save your settings, highlight Done and press
If the desired channel label is not available from the
list of presets, you can create a custom label.
To create and assign a custom label:
1無
Open the Channel Labeling window.
2無
Press or to select a channel you want to
label.
3無
Press pqu to highlight Custom and press
The software keyboard will appear.
4無
Repeatedly press the corresponding key on the
remote control to highlight the desired character
on the on-screen software keyboard.
5無
The highlighted character is entered after you
either press a different key, press u key, or after a
two-second pause.
6無
Repeat steps 4 and 5 until you have entered all
desired text.
7無
When finished, press
8無
New labels will be added to the list in alphabetical
order and marked with an icon to indicate that
they are custom. Highlight the new custom label
and press to assign.
Assigned channel labels will be displayed in the
banner, Channel Options, and Channel Browser
.
.
.
.
TM
.
(continued)