Table of Contents
Advertisement
About Status LED's Condition
Color
(Off )
(White)
The initial unit is being connected to the network
(White)
(Red)
(White)
The additional unit is being connected to the network
(Off )
(Red)
(Dimmed White)
(Red)
, Note for Status LED's Condition
y When you set the group at first, Network status LED turns green.
y The additional groups are set, the Network status LED color is changed in group order.
(
(Green) >
(Magenta) >
y If the grouped speakers switch to the network standby mode, the brightness of Network status LED gets
dark.
Specification
Power requirements: Refer to the main label on
the unit.
Power consumption: 50 W
y Networked standby : 6.0 W
(If all network ports are activated.)
Amplifier Total output: 700 W
Bluetooth: Codec SBC
Dimensions (W x H x D): (1100 x 106 x 135) mm
(without Foot)
Net Weight (Approx.): 8.2 kg
y Design and specifications are subject to change
without notice.
The unit is waiting for network connection
(
button is pressed)
The unit is connected to the network
(
button is pressed)
Network standby mode
Standby mode
(Cyan) >
(Blue) >
OPEN SOURCE
SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL
and other open source licenses, that is contained in
this product, please visit
http://opensource.lge.com.
In addition to the source code, all referred license
terms, warranty disclaimers and copyright notices
are available for download.
LG Electronics will also provide open source code
to you on CD-ROM for a charge covering the cost
of performing such distribution (such as the cost of
media, shipping and handling) upon email request
to opensource@lge.com. This offer is valid for three
(3) years from the date on which you purchased the
product.
Status
Network Status
Standby Mode Status
(Yellow) )
Appendix
23
6
Advertisement
Table of Contents
