Daisy Chain Monitors; Rgb Cable; Dvi Cable - LG 55WV70BS Owner's Manual

Daisy Chain Monitors

Use this function to share the RGB video signal with other monitors without having to use a separate signal
splitter box.
• To use different products connected to each other Connect one end of the signal input cable (15-pin
D-Sub Signal Cable) to the RGB OUT connector of product 1 and connect the other end to the RGB IN
connector of other products.

RGB Cable

15-pin D-Sub Signal Cable
(Max 3m)

DVI Cable

DVI Cable
(Max 3m)
NOTE
When multiple monitors are connected in RGB input, it is recommended to use a distributor to avoid
y
signal degradation and cable loss.
For DVI, in general, up to 12 monitors can be connected via the DVI Out port (at the recommended
y
resolution) if the signal is stable and there is no cable loss.If you want to connect more than this
number of monitors, we recommended that you use a distributor.
When the tile mode is configured via DVI cables, only the monitor that receives first signals can play
y
HDCP-encrypted content. (The DVI Out port does not support HDCP.)
If the signal cable between the product and your PC is too long, make sure to use the DVI (RGB)
y
booster or DVI (RGB) optical cable.
If input signals are received through the HDMI/DP cable, multiple monitors cannot be connected via
y
the DVI Out port.
RGB
/COMPONENT OUT
RGB
/COMPONENT OUT /COMPONENT OUT
RGB
/COMPONENT IN
RGB
/COMPONENT IN /COMPONENT IN
Monitor SET 1 Monitor SET 2
DVI IN DVI OUT DVI IN
DVI IN DVI OUT DVI IN
Monitor SET 1 Monitor SET 2
RGB RGB
/COMPONENT OUT /COMPONENT OUT
RGB RGB
/COMPONENT OUT
RGB RGB
/COMPONENT IN /COMPONENT IN
RGB RGB
/COMPONENT IN
Monitor SET 3
DVI OUT DVI IN DVI OUT
DVI OUT DVI IN
Monitor SET 3
MAKING CONNECTIONS
RGB
/COMPONENT OUT
RGB
/COMPONENT OUT
RGB
/COMPONENT IN
RGB
/COMPONENT IN
Monitor SET 4
DVI IN
DVI OUT DVI IN
Monitor SET 4
57