Using Your Router; Updating The Router's Firmware Via The Web Interface - Belkin F9K1113V4 User Manual

Broadband Internet connection such as a cable or DSL modem with RJ45
(Ethernet) connection
At least one computer with an installed network interface adapter
TCP/IP networking protocol installed on each computer
RJ45 Ethernet networking cable
Internet browser
Setup
A computer running Internet Explorer® 8 or higher, Firefox®, Google
Chrome™, or Safari®
Minimum 1GHz processor and 512MB RAM
Or a smart device running iOS or Android operating systems
USB Print and Storage Manager
Windows XP SP3 or higher, Windows Vista, or Windows 7; or Mac OS X
v10.5 or above
Minimum 1GHz processor and 512MB RAM
50MB of free hard-drive space for installation

Using Your Router

Auto Update on Your Belkin Router
The Router will automatically check for a newer version of firmware every time you log into the
dashboard and alert you with a message at the top of the screen if there is an update
available. You can choose to download the new version or ignore it.
You will see a series of prompts warning you that the firmware is about to be updated. Please
do not disconnect the power from the Router at this time as it could cause the system to fail.

Updating the Router's Firmware via the Web Interface