GeTTInG TO KnOW YOUR ROUTeR
Modem Router
Front Panel
A
B
a) Modem Router status light
Your Router's status is shown by the light on the front .
Off: The Router is not plugged into Power Modem's
power source .
blinking blue: The Modem Router is starting up .
solid blue: The Modem Router is connected to the Internet .
blinking amber: The Modem Router can't detect the Power Modem .
Either the Power Modem is unresponsive, or the ADSL (RJ11)
cable is not plugged into the Power Modem, or there is no signal .
b) Wi-fi Protected setup (WPs) light and button
The WPS button on the front of your Router can be used to
help establish a secure connection between your Router and
other WPS-enabled Wi-Fi devices such as computers . To use
the WPS feature on your Router, see "Getting Started > Adding
Computers to Your Network > Using the WPS Button " .
The small light near the WPS button shows what is happening
while you are using WPS to establish a connection .
Off: Idle
blinking blue: The Modem Router is listening for a WPS-enabled
computer or other device .
solid blue: The Modem Router has made a secure
connection with the computer or other device .
amber: A connection was not created .
34