Connecting Multiple Monitors
To use multiple products, first connect an external device to the product, connect one end of the supported signal input
cable to the
connector of the product, and then connect the other end to the
to connect to.
DP IN
HDMI IN 1
HDMI IN 2
RS-232C
IN
NOTE
•
If you set the tile mode using HDMI, you will not be able to watch HDCP-encrypted content.
•
If the signal cable between the product and your PC is too long, make sure to use the Booster or optical cable.
•
DP Cable - Use a DP cable that is certified to DP 1.1a standard or higher.
Using the Input List
(HOME)
•
HDMI1
HDMI2
DP OUT
DP IN
DP OUT
DP IN
DP OUT
DP IN
RS-232C
RS-232C
OUT
IN
connector of the product you wish
DP OUT
DP IN
DP OUT
DP IN
DP OUT
DP IN
RS-232C
RS-232C
OUT
IN
DP OUT
DP OUT
DP OUT
RS-232C
OUT
25