Forced Operation
Operation procedures when the remote control can't
be used.
Press the tact switch (forced operation) for 2 seconds.
If you want to stop operation, press again the tact
switch.
In case the power comes on again after power failure
on the forced operation mode, the operating
conditions are automatically set as follows:
During forced operation, the initial mode continues.
Operating mode
Indoor fan Speed
Setting temperature
Auto Restart Function
In case the power comes on again after a power failure, auto restarting operation is the function to operate
procedures automatically to the previous operating conditions.
Cooling Model
Room temperature ≥ set
Cooling
High
22 °C
Forced operation
Heat pump Model
Room temperature ≥ set
temperature -2 °C
Cooling
Set available
Set available
Owner's Manual 7
Prior to operation
(Tact switch)
temperature -2 °C
Heating
Set available
Set available