Table of Contents
Advertisement
Please install and adjust the machine according to the requirement of the manual.
It is very important to your security and correct operating the machine.
Pull the shipping bar out to avoid
damage to your washing machine
before your first use of it.
Adjust the Installation position
The largest allowed slope of the shank base of the machine is 2 . The slanting or rough ground will
result in unstable running or stoppage of the machine. Please adjust it with following methods:
Confirm it's horizontal
Hang the plumb to confirm it's horizontal.
<2
INSTALLATION AND ACCESSORY PARTS
Pull out
Shiping bar
Adjust the adjustable feet
1) To twist the adjustable foot, please first lift up
the side of the foot slightly, and twist the foot.
2) Fasten the nut after adjustment.
High
NET DIMENSION
Unit mm
Adjustable foot
Low
Advertisement
Table of Contents
