Table of Contents
Advertisement
Cooling Off Mode
(
9
) Ice Off
If you do not Touch any button, the freezer and fridge temperature indicator turn off in a few seconds.
If you Touch any button, the display lights up again.
(
) Filter
10
Cooling Off mode (also called Shop mode), is designed for use by retailers when they are displaying refrigerators on the shop
floor. In Cooling Off mode, the refrigerator's fan motor and lights work normally, but the compressors do not run, and
the refrigerator and freezer do not get cold.
To start Cooling Off mode, Touch and hold the Energy Saver button and the Power Freeze button for 3 seconds during normal
operation.
The refrigerator chime sounds and the temperature display flashes OF OF.
To cancel Cooling Off mode, Touch and hold the Energy Saver and the Power Freeze buttons again for 3 seconds.
When you touch the Ice Off button, this icon will Light up and the Ice Maker stops making ice.
We recommend you stop ice making if the following occur:
- There is enough ice in the ice bucket.
- You want to save water and energy.
- Water is not being supplied to the refrigerator.
If the ice maker function is ON, and the water line is not connected, there will be a water valve noise from back of the unit, Press
the Ice Off (Hold 3sec for child lock) button within 3sec until the Ice Off Indicator illuminates.
Water filter usage
This icon will light up to red when you need to change the filter.
After you use about 300 gallons of water, the filter indicator light up.(about 6 month).
After install the new water filter, reset the filter indicator by Touching Alarm/Hold 3 sec for Filter Reset button.
• If water is not dispensing or dispensing slowly, you need to replace the water filter because the water filter is clogged.
• Some areas have large amounts of lime in their water, which causes the water filter to clog more quickly.
Hide quick links:
Advertisement
Table of Contents
