Drum Cleaning - Beko UW7T1432CI User Manual

C
INFORMATION
• If the programme has not reached
the spinning step, you can change
the speed without switching the
machine to Pause mode.
4.3.10 Auxiliary function selection
Select the desired auxiliary functions before
starting the programme. Furthermore, you may
also select or cancel auxiliary functions that
are suitable to the running programme without
pressing the Start / Pause button when the
machine is operating. For this, the machine
must be in a step before the auxiliary function
you are going to select or cancel. If the auxiliary
function cannot be selected or canceled, light
of the relevant auxiliary function will blink 3
times to warn the user.
C
INFORMATION
• If a second auxiliary function conflicting
with the first one is selected before starting
the machine, the function selected first
will be canceled and the second auxiliary
function selection will remain active.
• An auxiliary function that is not compatible
with the programme cannot be selected.
(See, "Programme and consumption table")
• Auxiliary Function buttons may vary
according to the model of the machine.
4.3.10.1 Auxiliary functions
• Prelavaggio (Prewash)
A Prewash is only worthwhile for heavily soiled
laundry. Not using the Prewash will save
energy, water, detergent and time.
C
INFORMATION
• Prewash without detergent is
recommended for tulle and curtains.
• Rapido (Fast+)
When this function is selected, the durations of
the relevant programmes get shorter by 50%.
Thanks to the optimised washing steps,
high mechanic activity and optimum water
consumption, high washing performance is
achieved in spite of the reduced duration.
40 / EN
C
INFORMATION
• When you select this function, load your
machine with half of the maximum laundry
specified in the programme table.
• Pet Hair Removal
This function helps to remove pet hair that
remain on your garments more effectively.
When you select this function, Prewash and
Extra Rinse steps are added to the normal
programme. Thus, washing is performed with
more water and the pet hair is removed more
effectively.
4.3.10.2 Functions/Programmes
Selected by Pressing the Function
Buttons for 3 Seconds

• Drum Cleaning

Press and hold the auxiliary function button 1
for 3 seconds to select the programme.
Use regularly (once in every 1-2 months)
to clean the drum and provide the required
hygiene. Operate the programme while the
machine is completely empty. To obtain
better results, put powder lime-scale remover
for washing machines into the detergent
compartment no. "2". When the programme
is over, leave the loading door ajar so that the
inside of the machine gets dry.
C
INFORMATION
• This is not a washing programme.
It is a maintenance programme.
• Do not run the programme when there
is something in the machine. If you try to
do so, the machine detects that there is
load inside and aborts the programme.
• Child lock
Use Child Lock function to prevent children
from tampering with the machine. Thus
you can avoid any changes in a running
programme.
Washing Machine / User's Manual