Advertisement
Installing the floor Bracket kit(Fig.6)
1. Use 13 mm screw to fix the fixing bracket on the
middle of base pan.
2. Drill out a screw hole(6 mm) on the floor.
3. Insert a screw anchor (wall plug) into the drilled hole.
4. Move water dispenser, Align fixing bracket hole
with screw hole of the floor.
5. Put the 25mm screw into the screw hole of fixing
bracket.
6. Tighten the screw.
1
1
Push hot water button until water poured
out, then insert the plug into a socket
the power indicator will be on, then turn
on the heating/cooling switch, the
heating/cooling indicator will be on.
To avoid damage to the unit, do not plug the power cord or turn on the
heating switch until the water can flow out from the hot water spout when
the hot water button be activated.
After water is used up turn off heating/cooling switch and unplug the power
cord from socket. Then take out the used bottle, follow step 1 to 3 to connect
the new water bottle.
Never turn on the heating/cooling switch before plugging the power cord
to the socket.
2-3
1
socket,
4-5
6
Fig. 6
Advertisement
