Table of Contents
Advertisement
Quick Links
Congratulations with your new Bluetooth headset. Please read this manual before using it to make sure you
use it correct.
Headset overview
English
Next Song/Volume+
On & Off/Play & Pause
Previous Song/Volume-
Indicator
Mic
Line-in
Micro USB charging port
Pairing
Ensure that your phone or Bluetooth device is switched on.
1.
To pair the headset that has not been previously paired with a device, please switch on the headset by
2.
push and hold power button for approximately 5 seconds., the headset starts in Bluetooth search mode
(red/blue light flashes quickly and alternately and there is a prompt tone). Press and hold the power key
for 3 seconds, it will go into reconnection mode.
Activate Bluetooth on your phone or Bluetooth device, and set it to search for Bluetooth device.
3.
Select "DENVER BTH-205" from the list of found devices on your phone or Bluetooth devices.
4.
When Bluetooth is paired successfully, there will be prompt tone and the blue light turns to lighting
5.
continuously.
Switch On
After unit has been paired (look above), just hold power until the LED lights up and then let go. When it has
been paired it will automatically reconnect once turned on.
Switch Off
To switch off, press and hold the Power key about 3 seconds. There is a prompt tone and a red indicating
light. If the headset is not connected to a device within 10 minutes, it switches off automatically.
BT Headphone Manual
English
Next Song/Volume+
On & Off/Play & Pause
Previous Song/Volume-
Indicator
Mic
Line-in
Micro USB charging port
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Denver BTH-205
Summary of Contents for Denver BTH-205
- Page 1 Activate Bluetooth on your phone or Bluetooth device, and set it to search for Bluetooth device. Select “DENVER BTH-205” from the list of found devices on your phone or Bluetooth devices. When Bluetooth is paired successfully, there will be prompt tone and the blue light turns to lighting continuously.
- Page 2 To answer or end a call, push once on the phone key to answer and long press (approx. 1.5 second) to reject a call. End a call with a short press on phone key. Passive model You can use DENVER BTH-205 as a wired headphone. Simply connect the headset to your MP3 player with 3.5mm audio cable. Caution: Please avoid very high volume for a constant period of time.
- Page 3 Additional information is available at the technical department of your city. Hereby, Inter Sales A/S declares that the radio equipment type BTH-205 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.denver-electronics.com/Pages/Search.aspx?search=bth205...
Need help?
Do you have a question about the BTH-205 and is the answer not in the manual?
Questions and answers