Samsung PN51E7000FF User Manual page 21

Setting up Universal Remote with Universal Remote Code Set
If your remote controller buttons does not work, please set your remote to TV mode by using the
button.
1. To set up Universal Remote, press the
the top of your remote blink twice simulaneously.
2. Press the 1 button on your remote to select a Set-top box.
3. Press the number button corresponding to the port of device connected.
Port numbers are as follows:
✎
1
HDMI 1/DVI
4. Enter Universal Remote Code corresponding to device you have.
For more detailed information about Universal Remote Code, refer to "Universal Remote Code Set
✎
list" on page 22.
5. When done, all the LEDs on the top of your remote blink twice simultaneously.
6. Set your remote to STB mode by using the
device is not work, try again Steps 2 to 4 by using another Universal Remote Code.
Each time you press the number button, one of the LED blinks. You can check input result through
✎
the LED on the top of your remote. If you press the button too fast, Universal Remote Code may
not input correctly.
Using your remote as a Universal Remote
In Universal Remote mode, you can use your remote to control your TV and STB together, your TV alone,
or your STB alone. When you have set your remote to control your TV and STB, certain buttons control the
TV only and certain buttons control the STB only.
• Controlling the TV and STB Together
To control your TV and STB together, press the
center of your remote. The TV and STB LEDs go on and off. If the TV is on, it
automatically changes to the source the STB is connected to.
You can control the TV and Set-Top box using the universal remote. (For
example, press the Volume button to adjust the TV volume, press the
channel button to change the STB channels, etc.)
See the illustration to the right. When you are using the remote as a
✎
universal remote, the buttons demarcated for TV control the TV only and
the buttons demarcated for STB control the set top box only.
To turn only the TV off, press the
✎
and then press the
DEVICE button, change to STB mode, andthen press the
To turn the TV and the STB off, press the
seconds.
• Controlling the TV only.
Press the DEVICE button and change to TV mode. The TV LED goes on and off. You can only control
the TV using the universal remote.
• Controlling the STB only
Press the button and change to STB mode. The STB LED goes on and off. You can only
DEVICE
control the Set-Top box using the universal remote.
SETUP
2 3
HDMI 2 HDMI 3
DEVICE
DEVICE
button. To turn only the STB off, press the
P
P
English - 21
button on your remote for 3 seconds. All the LEDs on
5 7
AV Component
button, and then test your remote. If you external
WATCH TV button at the top
button, change to TV mode,
button.
P
button and hold it for two
DEVICE
TV STB
SOURCE
UNIVERSAL REMOTE
WATCH
SETUP DEVICE
TV
PRE-CH PRE-CH PRE-CH PRE-CH PRE-CH
MUTE MUTE MUTE MUTE MUTE MUTE MUTE
M M M M M M M
CH LIST CH LIST CH LIST CH LIST CH LIST CH LIST CH LIST
MENU MENU MENU MENU MENU MENU MENU
SEARCH SEARCH SEARCH SEARCH SEARCH
TOOLS TOOLS TOOLS TOOLS TOOLS INFO INFO INFO INFO INFO
TV
STB
RETURN RETURN RETURN RETURN RETURN EXIT EXIT EXIT EXIT
B
Family Story Family Story Family Story MTS MTS MTS
SUPPORT SUPPORT SUPPORT P.SIZE P.SIZE P.SIZE CC CC CC
l l l l l l l l l l l l l
l l l l l l l l l l l l l