Table of Contents
Advertisement
Advanced programmings and registrations
Restoring backup data (automatically backed up setting data) from built in flash
memory
Other than in an SD card, setting data (except sales data) may be backed up in the built in flash memory
as well as in an SD card (printer prints "Data Backup Normal End"). If AC power cord is plugged out
while battery power is low, all the setting data will be cleared and the cash register needs to be initialized.
In such a case, setting data can be restored if the data is in built in flash memory. Please follow the
instructions on the display for reading setting data or initializing the data.
POP setting
According to the setting conditions, several POP images can be selected and printed on the lower part of
receipts.
Top menu
Sub menu
[POP Setting]
Read POP Data
POP Operation
Setting
Print POP image
• POP images read by [Read POP Data] must be stored in an SD card beforehand using "ECR
Setting tool" of an PC.
• POP images printed by "Setting (by Amount)" are; Amount 1 = image 1, Amount 2 = image 2,
and Amount 3 = image 3.
• When several conditions of "Settings (by Amount)" are satisfied, the priority order is Amount 3
> Amount 2 > Amount 1.
POP Printing
Always print
Conditions
Same POP
Change POP
By Amount
Change POP
By Item
Do Not Print
Setting (Always same)
Setting (by Amount) Amount 1
Amount 2
Amount 3
E-139
What is to be set
Reads POP data from an SD card.
Always prints the same POP image.
By the amount, POP image can be changed
according to the "Setting (by Amount)"
setting
Prints POP image according to the set POP
No. of DEPT Setting.
No POP image is printed.
Selects a POP image from five images.
Sets condition to print POP message in
accordance with the amount. Three kinds of
POP images can be set in accordance with
the amount.
The amount is set by A x 10
Example
• 12.00 A=12,B=2
• 100.00 A=1,B=4
Prints set POP image to check.
.
B
Advertisement
Chapters
Table of Contents
