When Cooking Is Finished; Cooling Fan; Time & Power Level Adjustment - Breville Quick Touch Crisp BMO700BSS Instruction Book

WHEN COOKING IS FINISHED

At the end of any cooking cycle, the microwave
will beep 3 times and 'End' will flash on
the screen for 5 minutes or until the door
is opened.

COOLING FAN

At the end of the cooking cycle, the fan may
rotate to cool the electrical components.
When this occurs the words 'Cooling Fan' will
flash at the top of the LCD screen.
This is normal behavior and you can remove
food from the microwave or start another
cooking cycle while the fan is operating.
Heating Cooling Fan
TIME & POWER LEVEL ADJUSTMENT
Select different times and microwave power
levels by turning the TIME and POWER dials.
Turning the TIME Dial
Use the TIME dial to set cooking times up
to 95 minutes (95:00). The default time is
30 seconds. Turn the TIME dial clockwise
to increase the time or counterclockwise to
decrease the time.
TIME
POWER
Food Type
Amount
SMART
Turning the POWER Dial
COOK GRILL
Use the POWER dial to select from 10 different
power levels, 10%–100%. Turn the POWER dial
SMART
REHEAT
clockwise to increase the power level or
counterclockwise to decrease the power level.
SMART
DEFROST
100%
90%
80%
70%
A Bit More Timer
60%
50%
40%
30%
20%
10%
POWER
Amount
The power bar will reflect the cooking power
SMART
COOK GRILL
level including programs where variable power
levels are used.
It is normal in these programs to see the power
SMART
REHEAT
bar change during the cooking cycle.
SMART
DEFROST
NOTE
When the POWER dial is turned, 'MELT' and
'SOFTEN' will temporarily display on the LCD
A Bit More Timer
screen then disappear.
TIME
Food Type
23