Table of Contents
Advertisement
•
Do not run the engine indoors or in an enclosed
area.
•
Do not change the engine governor setting or
overspeed the engine.
•
Do not operate the machine when there is the risk
of lightning.
Maintenance and Storage
•
Before performing maintenance, do the following:
– Park the machine on a level surface.
– Shut off the engine, disconnect the spark-plug
wire, and wait for all movement to stop before
adjusting, cleaning, or repairing the machine.
– Let the engine cool before performing
maintenance or storing the machine.
– Disengage all power and operation controls.
•
Never lubricate, service, repair, or adjust the
machine with the engine running.
•
Keep equipment materials clear from the muffler
and engine to prevent fires. Clean up oil or fuel
spills.
•
Never allow untrained personnel to service the
machine.
•
Keep your hands, feet, and clothing away from
moving parts. If possible, do not make adjustments
with the engine running.
•
Keep all parts in good working condition and all
fasteners tightened. Replace all worn or damaged
decals.
•
Remove any buildup of grease, oil, or debris from
the machine.
•
Shut off the engine and inspect the machine if
an object enters the drum or causes another
obstruction. Make all necessary repairs before
starting the machine.
•
Do not tamper with safety devices.
•
Chock the tires when storing the machine.
•
Keep all fasteners and hose clamps securely
tightened and all equipment in good condition.
•
Use only genuine Toro replacement parts.
7
Advertisement
Table of Contents
