Advertisement
Quick Links
Model/Modelo/Modèle
65342LF-pLHP
Series/Series/Seria
ATAVIS
TM
Write purchased model number here.
Escriba aquí el número del modelo comprado.
Inscrivez le numéro de modèle ici.
▲Specify Finish / Especifíque el Acabado / Précisez le Fini
You may need / Usted puede necesitar / Articles dont vous pouvez avoir besoin:
For easy installation of your Brizo
faucet you will need:
• To READ ALL the instructions completely
before beginning.
• To READ ALL warnings, care, and maintenance
information.
• To purchase the correct water supply hook-up.
Para instalación fácil de su llave
Brizo
usted necesitará:
®
• LEER TODAS las instrucciones completamente
antes de empezar.
• LEER TODOS los avisos, cuidados, e
información de mantenimiento.
• Comprar las conexiones correctas para el
suministro de agua.
Pour installer votre robinet Brizo
facilement, vous devez:
• LIRE TOUTES les instructions avant de
débuter;
• LIRE TOUS les avertissements ainsi que toutes
les instructions de nettoyage et d'entretien;
• Acheter le bon nécessaire de raccordement.
www.brizo.com
TWO HANDLE WIDESPREAD BATHROOM FAUCET
102232
DOS MANILLARES ANCHO GRIFO DE BAÑO
ROBINET DE SALLE DE BAINS À DEUX POIGNÉES
®
®
1
06/12/2018
Rev. A
Advertisement
Related Manuals for Brizo Atavis 65342LF LHP Series
Summary of Contents for Brizo Atavis 65342LF LHP Series
- Page 1 Inscrivez le numéro de modèle ici. ▲Specify Finish / Especifíque el Acabado / Précisez le Fini You may need / Usted puede necesitar / Articles dont vous pouvez avoir besoin: For easy installation of your Brizo ® faucet you will need: •...
- Page 2 1 1/8" (28.58 mm) 1 1/8" (28.58 mm) INSTALLATION OF VALVE ASSEMBLIES INSTALLATION OF SPOUT NOTE: When drilling holes for supply valves, it is recommended that the hole NOTE: When drilling mounting holes for the spout, it is recommended that size be 1 1/8"...
- Page 3 INSTALLATION OF HANDLES INSTALLATION OF HOSE ASSEMBLY NOTE: Handles sold separately. Snap the quick connect hose assembly (1) onto the spout nipple (2) and end valve nipples (3). Make sure valve cartridge is in off position. Pull down moderately to ensure each connection has been made. Place handle (1) over end valve spline (2) and onto escutcheon.
- Page 4 1/2” (12.7 mm) IPS MAKE CONNECTIONS TO SUPPLY PLUMBING MAKE CONNECTIONS TO WATER LINES Connect flexible outlet hoses (1) to valve inlet ports (2) as shown. Choose hook-ups for 1/2" I.P.S. connections: (1) Ball nose riser (3/8" O.D. copper tubing), or Tighten nuts firmly with a wrench, but do not over tighten.
- Page 5 Step 3e POP-UP DRAIN INSTALLATION and stopper (3) as removable (4) or non- Apply silicone to underside of flange (1). Insert removable (5). Hand tighten pivot nut (1). body (2) into sink. Screw flange (1) into body Remove stopper (1) and flange (2). (2).
- Page 6 MAINTENANCE SHUT OFF WATER SUPPLIES BEFORE SERVICING FAUCET. If your faucet leaks out of spout outlet or around handle body, replace valve cartridge (4). a. Unscrew handle from escutcheon, pull up on handle (1) to remove. NOTE: It is best if you pull straight up on the handle.
- Page 7 Model/Modelo/Modèle 65342LF-pLHP Series/Series/Seria ATAVIS RP46409 Spline Adapter and Screw Adaptador con estrías y tornillo Adaptateur cannelé et vis RP100224 RP48428-1.2 15MM Cartridge Service Tool Aerator & Wrench Herramienta de servicio para Aereador y Llave el cartucho 15 MM Aérateur et Clé Clé...
-
Page 8: Cleaning And Care
& Bath Company para todos los reclamos a menos que el comprador haya registrado el producto compra. No se garantizan las pilas. con Brizo Kitchen & Bath Company. Esta garantía le aplica sólo a las llaves de agua de Brizo ®...