•
Never move the machine while the motor is running.
•
Keep the cowl closed and latched during operation.
•
Ensure that all the guards and shields are securely in place
before operating the machine.
•
Ensure that the On/Off switch is in the Off position
before connecting the machine to the electrical source.
•
If the mixing paddles strike a foreign object or if the
machine should start making an unusual noise or
vibration, stop the motor and empty the drum. Wait for
all moving parts to come to a complete stop and cool.
Vibration is generally a warning of trouble. Inspect for
clogging or damage. Clean and repair and/or replace
damaged parts.
•
Lightning can cause severe injury or death. If you see
lightning or hear thunder in the area, do not operate the
machine; seek shelter.
Maintenance and Storage
•
Before performing maintenance, do the following:
– Park the machine on level ground.
– Stop the motor. Wait for all movement to stop before
adjusting, cleaning, or repairing.
– Let the motor cool before performing maintenance
or storing the machine.
– Unplug the machine before making any repairs.
•
Never lubricate, service, repair, or adjust the machine
while it is running.
•
Keep equipment materials clear from the motor.
•
Never allow untrained personnel to service the machine.
•
Keep hands, feet, and clothing away from moving parts.
If possible, do not make adjustments with the motor
running.
•
Keep all parts in good working condition and all hardware
tightened. Replace all worn or damaged decals.
•
Remove any buildup of grease, oil, or debris from the
machine.
•
Do not modify the electrical connectors or wiring.
•
Do not connect the ground circuit of the machine to the
energized circuit of the electrical source.
•
Do not tamper with safety devices.
•
Chock the tires when storing the machine.
•
Keep all nuts, bolts, screws, and hose clamps securely
tightened. Keep equipment in good condition.
•
Use only genuine Toro replacement parts to ensure that
the original standards are maintained.
5