Home Accents Holiday TG76M3W89D23 Quick Start Manual

TM
NEED HELP?
DO NOT RETURN TO STORE. PLEASE VISIT US AT:
www.polygroupstore.com OR 1-877-527-0313

Safety Information

IMPORTANT SAFETY
INSTRUCTIONS
When using electrical products, basic precautions should always
be followed, including the following:
READ AND FOLLOW ALL
a.
SAFETY INSTRUCTIONS.
b. Do not use seasonal products outdoors unless marked suitable for
indoor and outdoor use. When products are used in outdoor applications,
connect the product to a Ground Fault Circuit Interrupting (GFCI)
outlet. If one is not provided, contact a qualified electrician for proper
installation.
c. This seasonal product is not intended for permanent installation or use.
d. Do not mount or place the product near gas or electric heaters,
fireplaces, candles, or other similar sources of heat.
e. Do not secure the wiring of the product with staples or nails, or place on
sharp hooks or nails.
f. Do not let lamps rest on the supply cord or on any wire.
g. Unplug the product when leaving the house, when retiring for the
night, or if left unattended.
h. This is an electric product and not a toy! To avoid risk of fire, burns,
personal injury and electric shock it should not be played with or
placed where small children can reach it.
i. Do not use this product for other than its intended use.
j. Do not hang ornaments or other objects from cord, wire, or light string.
k. Do not close doors or windows on the product or exten sions cords as
this may damage the wire insulation.
l. Do not cover the product with cloth, paper, or any materi al that is not
a part of the product when in use.
m. This product is equipped with push-in type lamps. Do not twist lamps.
n. Read and follow all instructions that are on the product or provide with
the product.
SAVE THESE INSTRUCTIONS
o.
Pre-Assembly
Package Contents
Description
Part
A Tree top
B Tree center, Sticker 2
C Tree center, Sticker 1
D Tree stand

Assembly

Assembling the tree stand

Step 1. Choose a location near a wall outlet.
Step 2. Unfold the legs of the tree stand and lay the stand on the floor.
Step 3. Slide the locking disk of the tree stand down until it snaps
into place.
Assembling the tree
Step 1. Remove the protective caps from the tree bottom and insert
the pole into the tree stand.
Step 2. Continue by inserting the upper tree section(s) to the lower
section(s) until inserting the tree top.
Step 3. Shape the branches to your preference by working from the
bottom to the top. When adjusting branches, ensure that all
wires are free of branch hinges.
Step 4. Connect the light strings as per the color labels indicated in
attached photo and insert the adapter into the wall outlet.
Step 5. Shape the tree from the bottom to the top. Start with the
branches farthest from the pole – fan out in a star shape,
and continue until the entire tree is shaped.
Step 6. When finished shaping the branches, slightly upsweep all
branch tips for a uniform look.
Section 2
Section 1
Quantity
1
1
1
1
Model: TG76M3W89D23
Top view
Tree top
70S
70S
70S
90S
90S
80S
80S
Control box
Christmas Tree
1004 155 280
Sku #
Side view
Do Not Tamper
Internal Parts
Open the
protective
cap
Do Not Tamper
Internal Parts
Open the
protective
cap
Adapter
To Be Plugged
Into Wall
Outlet
Foot Pedal
on/off Switch