Vivotek FD9182-H User Manual page 331

© 2020 VIVOTEK INC. All Right Reserved
PARAMETER
di
mdwin
mdwin0
vi
vadp
<product dependent>
valevel
VALUE SECURITY
(get/set)
0,<positive 6/6
integer>
0,<positive 6/6
integer>
0,<positive 6/6
integer>
0,<positive 6/6
integer>
0,<positive 6/6
integer>
0,1 6/6
DESCRIPTION
Indicate the source id of di trigger.
This field is required when trigger
condition is "di".
One bit represents one digital input. The
LSB indicates DI 0.
* Only available when "capability_ndi" >
0
Indicate the source window id of motion
detection.
This field is required when trigger
condition is "md".
One bit represents one window.
st
The LSB indicates the 1
For example, to detect the 1
windows, set mdwin as 5.
Similar to mdwin. The parameter takes
effect when profile 1 of motion detection
is enabled.
Indicate the source id of vi trigger.
This field is required when trigger
condition is "vi".
One bit represents one digital input. The
LSB indicates VI 0.
Indicate the source id of vadp event
notification.
Each bit corresponds to one vadp source,
and the LSB indicates source id 0.
For example, to detect event from any
one of source id 0, 1 and 3, set vadp to
11.
* Only available when vadp is listed in
"capability_supporttriggertypes"
Select audio detection event.
0: not select
1: select
VIVOTEK
window.
st rd
and 3
204
User's Manual - 331